-- *****************************************************************
-- CISCO-ATM-QOS-MIB.my: Cisco ATM QoS MIB file
--
-- June 2002, Danny Lee
--
-- Copyright (c) 2002 by Cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************CISCO-ATM-QOS-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,Unsigned32,Integer32FROM SNMPv2-SMI
MODULE-COMPLIANCE,OBJECT-GROUPFROM SNMPv2-CONF
TEXTUAL-CONVENTIONFROM SNMPv2-TC
ifIndex FROM IF-MIB
atmVplVpi,atmVclVpi,atmVclVci FROM ATM-MIB
AtmServiceCategoryFROM ATM-FORUM-TC-MIB
ciscoMgmt FROM CISCO-SMI;ciscoAtmQosMIB MODULE-IDENTITY
LAST-UPDATED"200206100000Z"ORGANIZATION"Cisco Systems, Inc."CONTACT-INFO"Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
SA
Tel: +1 800 553-NETS
Email: cs-atm@cisco.com"DESCRIPTION"The MIB is created to provide ATM QoS information in
these areas:
1. Traffic shaping on a per-VC basis
2. Traffic shaping on a per-VP basis
3. Per-VC queuing/buffering
Although the initial requirements of the MIB are
driven to support the GSR TAZ line card,
CISCO-ATM-QOS-MIB is designed as a generic MIB to
support ATM interfaces across all platforms.
Here are the tables defined in this MIB:
ciscoAtmQosVccTable
- to provide information on traffic shaping on
a per-VC basis.
ciscoAtmQosVpcTable
- to provide information on traffic shaping on
a per-VP basis.
ciscoAtmQosVcQueuingTable
ciscoAtmQosVcQueuingClassTable
- to provide information on per-VC
queuing/buffering."REVISION"200206100000Z"DESCRIPTION"Initial version of this MIB module."::={ ciscoMgmt 279}ciscoAtmQosMIBNotifs OBJECTIDENTIFIER::={ ciscoAtmQosMIB 0}ciscoAtmQosMIBObjects OBJECTIDENTIFIER::={ ciscoAtmQosMIB 1}ciscoAtmQosMIBConform OBJECTIDENTIFIER::={ ciscoAtmQosMIB 2}caqVccParams OBJECTIDENTIFIER::={ ciscoAtmQosMIBObjects 1}caqVpcParams OBJECTIDENTIFIER::={ ciscoAtmQosMIBObjects 2}
caqQueuingParams OBJECTIDENTIFIER::={ ciscoAtmQosMIBObjects 3}--
--
-- Beginning Textual Convention DefinitionsVcParamConfigLocation ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"The configuration source of a vc parameter:
1 - Not configured - using default
2 - Configured on vc directly
3 - VC-class configured on vc
4 - VC-class configured on sub-interface
5 - VC-class configured on main-interface.
"SYNTAXINTEGER{ configDefault(1),configVcDirect(2),configVcClass(3),configVcClassSubInterface(4),
configVcClassInterface(5)}VpState ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"States of virtual path:
1 - Inactive
2 - Active
"SYNTAXINTEGER{ vpStateInactive(1),vpStateActive(2)}-- Ending Textual Convention Definitions
--
----
--
-- Per-VC Traffic shaping parameters
-- (Beginning of caqVccTable)caqVccParamsTable OBJECT-TYPESYNTAXSEQUENCEOF CaqVccParamsEntry
MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"This table is defined to provide QoS information for
each active ATM VC existing on the interface."::={ caqVccParams 1}caqVccParamsEntry OBJECT-TYPESYNTAX CaqVccParamsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This list contains the ATM QoS parameters provided by
ciscoAtmQosVccEntry."INDEX{ ifIndex, atmVclVpi, atmVclVci }::={ caqVccParamsTable 1}
CaqVccParamsEntry ::=SEQUENCE{
caqVccParamsType AtmServiceCategory,
caqVccParamsPcrIn0 Unsigned32,
caqVccParamsPcrIn01 Unsigned32,
caqVccParamsPcrOut0 Unsigned32,
caqVccParamsPcrOut01 Unsigned32,
caqVccParamsScrIn0 Unsigned32,
caqVccParamsScrIn01 Unsigned32,
caqVccParamsScrOut0 Unsigned32,
caqVccParamsScrOut01 Unsigned32,
caqVccParamsBcsIn0 Unsigned32,
caqVccParamsBcsIn01 Unsigned32,
caqVccParamsBcsOut0 Unsigned32,
caqVccParamsBcsOut01 Unsigned32,
caqVccParamsInheritLevel VcParamConfigLocation,
caqVccParamsMcrIn Unsigned32,
caqVccParamsMcrOut Unsigned32,
caqVccParamsInvRdf Unsigned32,
caqVccParamsInvRif Unsigned32,
caqVccParamsRfl VcParamConfigLocation,
caqVccParamsCdv Unsigned32,
caqVccParamsCdvt Unsigned32,
caqVccParamsIcr Unsigned32,
caqVccParamsTbe Unsigned32,
caqVccParamsFrtt Unsigned32,
caqVccParamsNrm Unsigned32,
caqVccParamsInvTrm Unsigned32,
caqVccParamsInvCdf Unsigned32,
caqVccParamsAdtf Unsigned32}caqVccParamsType OBJECT-TYPESYNTAXAtmServiceCategoryMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The service category of this virtual circuit connection."::={ caqVccParamsEntry 1}
caqVccParamsPcrIn0 OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Input Peak Cell Rate (PCR) in kbps with
Cell Loss Priority bit set to 0 (clp0)."::={ caqVccParamsEntry 2}caqVccParamsPcrIn01 OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Number of OAM F5 end to end loopback cells sent through
the VCC."::={ caqVccParamsEntry 3}caqVccParamsPcrOut0 OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrent
DESCRIPTION"Output Peak Cell Rate (PCR) in kbps with
Cell Loss Priority bit set to 0 (clp0)."::={ caqVccParamsEntry 4}caqVccParamsPcrOut01 OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Output Peak Cell Rate (PCR) in kbps with
Cell Loss Priority bit set to 1 (clp01)."::={ caqVccParamsEntry 5}caqVccParamsScrIn0 OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Input Sustained Cell Rate (SCR) in kbps
for connection with VBR type of QoS and
Cell Loss Priority bit set to 0 (clp0)."
::={ caqVccParamsEntry 6}caqVccParamsScrIn01 OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Input Sustained Cell Rate (SCR) in kbps
for connection with VBR type of QoS and
Cell Loss Priority bit set to 1 (clp01)."::={ caqVccParamsEntry 7}caqVccParamsScrOut0 OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Output Sustained Cell Rate (SCR) in kbps
for connection with VBR type of QoS and
Cell Loss Priority bit set to 0 (clp0)."::={ caqVccParamsEntry 8}
caqVccParamsScrOut01 OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Output Sustained Cell Rate (SCR) in kbps
for connection with VBR type of QoS and
Cell Loss Priority bit set to 1 (clp01)."::={ caqVccParamsEntry 9}caqVccParamsBcsIn0 OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Input Burst Cell Size (BCS) for connection
with VBR type of QoS and
Cell Loss Priority bit set to 0 (clp0)."::={ caqVccParamsEntry 10}caqVccParamsBcsIn01 OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Input Burst Cell Size (BCS) for connection
with VBR type of QoS and
Cell Loss Priority bit set to 1 (clp01)."::={ caqVccParamsEntry 11}caqVccParamsBcsOut0 OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Output Burst Cell Size (BCS) for connection
with VBR type of QoS and
Cell Loss Priority bit set to 0 (clp0)."::={ caqVccParamsEntry 12}caqVccParamsBcsOut01 OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrent
DESCRIPTION"Output Burst Cell Size (BCS) for connection
with VBR type of QoS and
Cell Loss Priority bit set to 1 (clp01)."::={ caqVccParamsEntry 13}caqVccParamsInheritLevel OBJECT-TYPESYNTAX VcParamConfigLocation
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The source of configuration for peak cell rate."::={ caqVccParamsEntry 14}caqVccParamsMcrIn OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Input Minimum Cell Rate (MCR) in kbps for
connection with VBR-nrt or ABR type of QoS."::={ caqVccParamsEntry 15}caqVccParamsMcrOut OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Output Minimum Cell Rate (MCR) in kbps for
connection with VBR-nrt or ABR type of QoS."::={ caqVccParamsEntry 16}caqVccParamsInvRdf OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Inverse of rate decrease factor."::={ caqVccParamsEntry 17}caqVccParamsInvRif OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-write
STATUScurrentDESCRIPTION"Inverse of rate increase factor."::={ caqVccParamsEntry 18}caqVccParamsRfl OBJECT-TYPESYNTAX VcParamConfigLocation
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The source of configuration for rate factor."::={ caqVccParamsEntry 19}caqVccParamsCdv OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Cell delay variation."::={ caqVccParamsEntry 20}caqVccParamsCdvt OBJECT-TYPE
SYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Cell delay variation tolerance."::={ caqVccParamsEntry 21}caqVccParamsIcr OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Initial cell rate."::={ caqVccParamsEntry 22}caqVccParamsTbe OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Transient buffer exposure."
::={ caqVccParamsEntry 23}caqVccParamsFrtt OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Fixed round-trip time."::={ caqVccParamsEntry 24}caqVccParamsNrm OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Maximum number of tx cells for each forward rm cell."::={ caqVccParamsEntry 25}caqVccParamsInvTrm OBJECT-TYPESYNTAXUnsigned32
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Maximum time between forward rm cells."::={ caqVccParamsEntry 26}caqVccParamsInvCdf OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Inverse of cutoff decrease factor."::={ caqVccParamsEntry 27}caqVccParamsAdtf OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Allowed cell rate decrease time factor."::={ caqVccParamsEntry 28}
-- (End of caqVccParamsTable)
--
----
--
-- Per-VP traffic shaping parameters.
-- (Beginning of caqVpcParamsTable)caqVpcParamsTable OBJECT-TYPESYNTAXSEQUENCEOF CaqVpcParamsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table is defined to provide QoS information for
each active ATM VP existing on the interface."::={ caqVpcParams 1}caqVpcParamsEntry OBJECT-TYPESYNTAX CaqVpcParamsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This list contains the ATM QoS parameters provided by
ciscoAtmQosVpcEntry."INDEX{ ifIndex, atmVplVpi }
::={ caqVpcParamsTable 1}
CaqVpcParamsEntry ::=SEQUENCE{
caqVpcParamsVpState VpState,
caqVpcParamsPeakRate Unsigned32,
caqVpcParamsCesRate Unsigned32,
caqVpcParamsDataVcCount Integer32,
caqVpcParamsCesVcCount Integer32,
caqVpcParamsVcdF4Seg Integer32,
caqVpcParamsVcdF4Ete Integer32,
caqVpcParamsScr Unsigned32,
caqVpcParamsMbs Unsigned32,
caqVpcParamsAvailBw Unsigned32}caqVpcParamsVpState OBJECT-TYPESYNTAX VpState
MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"VP state of the current permanent virtual path."::={ caqVpcParamsEntry 1}caqVpcParamsPeakRate OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Maximum rate in kbps at which the associated
permanent virtual path can transmit data."::={ caqVpcParamsEntry 2}caqVpcParamsCesRate OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Maximum rate in kbps at which CES VCs can transmit
data with the associated permanent virtual path."::={ caqVpcParamsEntry 3}caqVpcParamsDataVcCount OBJECT-TYPESYNTAXInteger32(0..65535)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of data VCs currently associated with
the permanent virtual path."::={ caqVpcParamsEntry 4}caqVpcParamsCesVcCount OBJECT-TYPESYNTAXInteger32(0..65535)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of CES VCs currently associated with
the permanent virtual path."::={ caqVpcParamsEntry 5}caqVpcParamsVcdF4Seg OBJECT-TYPESYNTAXInteger32(0..65535)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Vcd for F4 OAM segment processing."::={ caqVpcParamsEntry 6}caqVpcParamsVcdF4Ete OBJECT-TYPESYNTAXInteger32(0..65535)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Vcd for F4 OAM end to end processing."::={ caqVpcParamsEntry 7}caqVpcParamsScr OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Sustained cell rate associated with the PVP."::={ caqVpcParamsEntry 8}caqVpcParamsMbs OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Maximum burst size associated with the PVP."::={ caqVpcParamsEntry 9}caqVpcParamsAvailBw OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION
"Bandwidth in Kbps currently currently available
on this PVP."::={ caqVpcParamsEntry 10}-- End of caqVpcParamsTable
--
----
--
-- Per-VC queuing parameters
-- Beginning of caqQueuingParamsTablecaqQueuingParamsTable OBJECT-TYPESYNTAXSEQUENCEOF CaqQueuingParamsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table provides queuing related information
for a VC existing on an ATM interface."::={ caqQueuingParams 1}caqQueuingParamsEntry OBJECT-TYPESYNTAX CaqQueuingParamsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This is defined as an entry in caqQueuingParamsTable."
INDEX{ ifIndex, atmVclVpi, atmVclVci }::={ caqQueuingParamsTable 1}
CaqQueuingParamsEntry ::=SEQUENCE{
caqQueuingParamsMeanQDepth Unsigned32}caqQueuingParamsMeanQDepth OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Mean Queue Depth associated with the vc. This value
is calculated based on the actual queue depth on the
interface and the exponential weighting constant."::={ caqQueuingParamsEntry 1}-- (End of caqQueuingParamsTable)
--
----
--
-- (Beginning of caqQueuingParamsClassTable)caqQueuingParamsClassTable OBJECT-TYPE
SYNTAXSEQUENCEOF CaqQueuingParamsClassEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table provides queuing information for all
queuing classes associating with a VC."::={ caqQueuingParams 2}caqQueuingParamsClassEntry OBJECT-TYPESYNTAX CaqQueuingParamsClassEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This is defined as an entry in ciscoAtmQosVcQueuingClassTable
to provide queuing information of a specific class."INDEX{ ifIndex, atmVclVpi, atmVclVci,
caqQueuingParamsClassIndex }::={ caqQueuingParamsClassTable 1}
CaqQueuingParamsClassEntry ::=SEQUENCE{
caqQueuingParamsClassIndex Integer32,
caqQueuingParamsClassRandDrp Unsigned32,
caqQueuingParamsClassTailDrp Unsigned32,
caqQueuingParamsClassMinThre Unsigned32,
caqQueuingParamsClassMaxThre Unsigned32,
caqQueuingParamsClassMrkProb Unsigned32}caqQueuingParamsClassIndex OBJECT-TYPESYNTAXInteger32(0..8)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A class index, which associates with an IP precedence
(0 to 8), is defined to reference individual
caqQueuingParamsClassEntry."::={ caqQueuingParamsClassEntry 1}caqQueuingParamsClassRandDrp OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of packets dropped when Mean Queue
Length is between Minimum Threshold and
Maximum Threshold range."::={ caqQueuingParamsClassEntry 2}caqQueuingParamsClassTailDrp OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of packets dropped because the Mean
Queue Depth exceeds the Maximum Threshold value."::={ caqQueuingParamsClassEntry 3}caqQueuingParamsClassMinThre OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Minimum Threshold value in kbps."::={ caqQueuingParamsClassEntry 4}caqQueuingParamsClassMaxThre OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Maximum Threshold value in kbps."::={ caqQueuingParamsClassEntry 5}caqQueuingParamsClassMrkProb OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"Mark probability denominator. This is the value used
in the calculation of a packet being dropped when
the average queue size is between the minimum
threshold and the maximum threshold."::={ caqQueuingParamsClassEntry 6}-- (End of caqQueuingParamsClassTable)
--
---- Conformance InformationciscoAtmQosMIBCompliances OBJECTIDENTIFIER::={ ciscoAtmQosMIBConform 1}ciscoAtmQosMIBGroups OBJECTIDENTIFIER::={ ciscoAtmQosMIBConform 2}-- Compliance StatementciscoAtmQosMIBCompliance MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for entities which implement
this Cisco ATM QoS MIB."MODULE-- this moduleMANDATORY-GROUPS{ ciscoAtmQosVccGroup,
ciscoAtmQosVpcGroup,
ciscoAtmQosVcQueuingGroup
}OBJECT caqVccParamsType
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT caqVccParamsPcrIn0
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT caqVccParamsPcrIn01
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT caqVccParamsPcrOut0
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT caqVccParamsPcrOut01
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT caqVccParamsScrIn0
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT caqVccParamsScrIn01
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT caqVccParamsScrOut0
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT caqVccParamsScrOut01
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT caqVccParamsBcsIn0
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT caqVccParamsBcsIn01
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT caqVccParamsBcsOut0
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT caqVccParamsBcsOut01
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT caqVccParamsMcrIn
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT caqVccParamsMcrOut
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT caqVccParamsInvRdf
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."
OBJECT caqVccParamsInvRif
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT caqVccParamsCdvt
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT caqVccParamsIcr
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT caqVccParamsTbe
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT caqVccParamsFrtt
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT caqVccParamsNrm
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."
OBJECT caqVccParamsInvTrm
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."GROUP ciscoAtmQosVccAddon1Group
DESCRIPTION"This group is optional."GROUP ciscoAtmQosVpcAddon1Group
DESCRIPTION"This group is optional."::={ ciscoAtmQosMIBCompliances 1}-- units of conformance:ciscoAtmQosVccGroup OBJECT-GROUPOBJECTS{
caqVccParamsType,
caqVccParamsPcrIn0,
caqVccParamsPcrIn01,
caqVccParamsPcrOut0,
caqVccParamsPcrOut01,
caqVccParamsScrIn0,
caqVccParamsScrIn01,
caqVccParamsScrOut0,
caqVccParamsScrOut01,
caqVccParamsBcsIn0,
caqVccParamsBcsIn01,
caqVccParamsBcsOut0,
caqVccParamsBcsOut01,
caqVccParamsInheritLevel,
caqVccParamsMcrIn,
caqVccParamsMcrOut,
caqVccParamsInvRdf,
caqVccParamsInvRif,
caqVccParamsRfl
}STATUScurrentDESCRIPTION"A collection of objects providing per-VC
ATM QoS related info."::={ ciscoAtmQosMIBGroups 1}ciscoAtmQosVccAddon1Group OBJECT-GROUPOBJECTS{
caqVccParamsCdv,
caqVccParamsCdvt,
caqVccParamsIcr,
caqVccParamsTbe,
caqVccParamsFrtt,
caqVccParamsNrm,
caqVccParamsInvTrm,
caqVccParamsInvCdf,
caqVccParamsAdtf
}STATUScurrentDESCRIPTION"Add-on objects providing per-VC
ATM QoS related info."::={ ciscoAtmQosMIBGroups 2}ciscoAtmQosVpcGroup OBJECT-GROUPOBJECTS{
caqVpcParamsVpState,
caqVpcParamsPeakRate,
caqVpcParamsCesRate,
caqVpcParamsDataVcCount,
caqVpcParamsCesVcCount,
caqVpcParamsVcdF4Seg,
caqVpcParamsVcdF4Ete,
caqVpcParamsScr,
caqVpcParamsMbs
}STATUScurrentDESCRIPTION"A collection of objects providing per-VP
ATM QoS related info."::={ ciscoAtmQosMIBGroups 3}
ciscoAtmQosVpcAddon1Group OBJECT-GROUPOBJECTS{
caqVpcParamsAvailBw
}STATUScurrentDESCRIPTION"Add-on objects providing per-VP
ATM QoS related info."::={ ciscoAtmQosMIBGroups 4}ciscoAtmQosVcQueuingGroup OBJECT-GROUPOBJECTS{
caqQueuingParamsMeanQDepth,
caqQueuingParamsClassRandDrp,
caqQueuingParamsClassTailDrp,
caqQueuingParamsClassMinThre,
caqQueuingParamsClassMaxThre,
caqQueuingParamsClassMrkProb
}STATUScurrentDESCRIPTION"A collection of objects providing per-VC
queuing/buffering related info."::={ ciscoAtmQosMIBGroups 5}
END